| |
| |
喷雾特性及用途：
该喷嘴结构形式为固定旋流芯式，射流形式为寞实
心锥形；适用于方、板坯连铸机的二次冷却，也可用于
涂料的喷涂、电除尘以及其它工序的冷却和清洗。 |
| | | | 技术参数表： |
| |
产品型号 | 国外相应型号 |
材料 | MPa压力下的流量（1/min） |
喷射角（度） | |
0.1 | 0.2 |
0.3 | 0.4 |
0.5 | 0.6 |
0.7 | 0.9 |
1.0 | 0.15 |
0.3 | 0.5 |
| 3/8"PZ4165QZ4 | 4065L | Hpb59-11Cr18Ni9Ti | 2.3 | 3.3 | 4.1 | 4.9 | 5.4 | 5.8 | 6.3 | 7.1 | 7.5 | 60 | 65 | 68 |
| 3/8"PZ5465QZ4 | 5465L | 3.1 | 4.4 | 5.4 | 6.2 | 7.0 | 7.6 | 8.2 | 9.4 | 9.9 | 60 | 65 | 68 |
| 3/8"PZ5565QZ4 | 5565L | 3.2 | 4.5 | 5.5 | 6.3 | 7.1 | 7.8 | 8.4 | 9.5 | 10.0 | 60 | 65 | 68 |
| 3/8"PZ5765QZ4 | 5765L | 3.3 | 4.7 | 5.7 | 6.5 | 7.4 | 8.1 | 8.7 | 9.9 | 10.4 | 60 | 65 | 68 |
| 3/8"PZ6065QZ4 | 6065L | 3.5 | 4.9 | 6.0 | 6.9 | 7.7 | 8.5 | 9.2 | 10.4 | 11.0 | 60 | 65 | 68 |
| 3/8"PZ6565QZ4 | 6565L | 3.8 | 5.3 | 6.5 | 7.5 | 8.4 | 9.2 | 9.9 | 11.3 | 11.9 | 60 | 65 | 68 |
| 3/8"PZ7465QZ4 | 7465L | 4.3 | 6.0 | 7.4 | 8.5 | 9.6 | 10.5 | 11.3 | 12.8 | 13.5 | 60 | 65 | 68 |
| 3/8"PZ8065QZ4 | 8065L | 4.6 | 6.5 | 8.0 | 9.2 | 10.3 | 11.3 | 12.2 | 13.9 | 14.6 | 60 | 65 | 68 |
| 3/8"PZ9565QZ4 | 9565L | 5.5 | 7.8 | 9.5 | 11.0 | 12.3 | 13.4 | 14.5 | 16.5 | 17.3 | 60 | 65 | 68 |
| 3/8"PZ9865QZ4 | 9865L | 5.7 | 8.0 | 9.8 | 11.3 | 12.7 | 13.9 | 15.0 | 17.0 | 17.9 | 60 | 65 | 68 |
| 3/8"PZ12465QZ4 | 12065L | 7.1 | 10.0 | 12.4 | 14.3 | 16.0 | 17.5 | 18.9 | 21.5 | 22.6 | 60 | 65 | 68 |
| 3/8"PZ16065QZ4 | 16065L | 9.2 | 13.1 | 16.0 | 18.5 | 20.7 | 22.6 | 24.4 | 27.7 | 29.2 | 60 | 65 | 68 |
| 3/8"PZ5480QZ4 | 5480L | 3.1 | 4.4 | 5.4 | 6.2 | 7.0 | 7.6 | 8.2 | 9.4 | 9.9 | 75 | 80 | 83 |
| 3/8"PZ7480QZ4 | 7480L | 4.3 | 6.0 | 7.4 | 8.5 | 9.6 | 10.5 | 11.3 | 12.8 | 13.5 | 75 | 80 | 83 |
|
| | |
|
